Download mdt windows 10

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Right-click the Windows 10 folder and select Import Operating System. The reason for adding the setup files has changed since earlier versions of MDT.

MDT used the setup files to install Windows. MDT uses DISM to apply the image; however, you still need the setup files because some components in roles and features are stored outside the main image.

When you configure your MDT Build Lab deployment share, you can also add applications to the new deployment share before creating your task sequence. This section walks you through the process of adding an application to the MDT Production deployment share using Adobe Reader as an example. Extract the. Right-click the Applications node, and create a new folder named Adobe.

In the Applications node, right-click the Adobe folder and select New Application. On the Application Type page, select the Application with source files option and select Next. On the Destination page, in the Specify the name of the directory that should be created text box, type Install – Adobe Reader and select Next.

The Adobe Reader application added to the Deployment Workbench. In order to deploy Windows 10 with MDT successfully, you need drivers for the boot images and for the actual operating system. This section will show you how to add drivers for the boot image and operating system, using the following hardware models as examples:. For boot images, you need to have storage and network drivers; for the operating system, you need to have the full suite of drivers.

You should only add drivers to the Windows PE images if the default drivers don’t work. Adding drivers that are not necessary will only make the boot image larger and potentially delay the download time. The key to successful management of drivers for MDT, and for any other deployment solution, is to have a good driver repository. From this repository, you import drivers into MDT for deployment, but you should always maintain the repository for future use.

In the steps below, it’s critical that the folder names used for various computer makes and models exactly match the results of wmic computersystem get model,manufacturer on the target system.

Even if you’re not going to use both x86 and x64 boot images, we still recommend that you add the support structure for future use. When you import drivers to the MDT driver repository, MDT creates a single instance folder structure based on driver class names.

However, you can, and should, mimic the driver structure of your driver source repository in the Deployment Workbench. This mimic is done by creating logical folders in the Deployment Workbench. The preceding folder names should match the actual make and model values that MDT reads from devices during deployment. You can find out the model values for your machines by using the following command in Windows PowerShell:.

If you want a more standardized naming convention, try the ModelAliasExit. By default, MDT adds any storage and network drivers that you import to the boot images. However, you should add only the drivers that are necessary to the boot image. You can control which drivers are added by using selection profiles. The drivers that are used for the boot images Windows PE are Windows 10 drivers. If you can’t locate Windows 10 drivers for your device, a Windows 7 or Windows 8.

Please complete all steps in the prerequisite guide before starting this guide. This guide requires about 5 hours to complete, but can require less time or more time depending on the speed of the Hyper-V host. After completing the current guide, also see the companion guide:. This guide uses the Hyper-V server role. If you do not complete all steps in a single session, consider using checkpoints and saved states to pause, resume, or restart your work.

Topics and procedures in this guide are summarized in the following table. An estimate of the time required to complete each procedure is also provided. Time required to complete procedures will vary depending on the resources available to the Hyper-V host and assigned to VMs, such as processor speed, memory allocation, disk speed, and network speed.

Installation might require several minutes to acquire all components. The first step in creating a deployment share is to mount this file on SRV1. To open the deployment workbench, click Start , type deployment , and then click Deployment Workbench.

To enable quick access to the application, right-click Deployment Workbench on the taskbar and then click Pin this program to the taskbar. Right-click the Operating Systems node, and then click New Folder. Name the new folder Windows Complete the wizard using default values and click Finish.

Right-click the Windows 10 folder created in the previous step, and then click Import Operating System. For purposes of this test lab, we will only add the prerequisite. NET Framework feature. Commerical applications ex: Microsoft Office will not be added to the deployment share.

For information about adding applications, see the Add applications section of the Create a Windows 10 reference image topic in the TechNet library. The next step is to create a task sequence to reference the operating system that was imported. Use the following settings for the New Task Sequence Wizard:. To edit the task sequence, double-click Windows 10 Enterprise x64 Default Image that was created in the previous step.

Click the Task Sequence tab. Click another location in the window to see the name change. Under Select the roles and features that should be installed , select. It gives you the ability to download multiple files at one time and download large files quickly and reliably.

It also allows you to suspend active downloads and resume downloads that have failed. Microsoft Download Manager is free and available for download now. Warning: This site requires the use of scripts, which your browser does not currently allow. See how to enable scripts. Choose the download you want. Download Summary:. Total Size: 0. This browser is no longer supported.

Download Microsoft Edge More info. Table of contents Exit focus mode. Table of contents. Tip Create a backup of the existing MDT infrastructure before attempting an upgrade. The following generic credentials are used in this guide. You should replace these credentials as they appear in each procedure with your credentials. Active Directory domain name : contoso. The following OU structure is used in this guide. Instructions are provided below to help you create the required OUs.

These steps assume that you have the MDT01 member server running and configured as a domain member server. You might need to temporarily disable IE Enhanced Security Configuration for administrators in order to download files from the Internet to the server.

Be sure that you are viewing file extensions and that you save the file with the.

 
 

 

[Download mdt windows 10

 

This guide uses the Hyper-V server role. If you do not complete all steps in a single session, consider using checkpoints and saved states to pause, resume, or restart your work.

Topics and procedures in this guide are summarized in the following table. An estimate of the time required to complete each procedure is also provided. Time required to complete procedures will vary depending on the resources available to the Hyper-V host and assigned to VMs, such as processor speed, memory allocation, disk speed, and network speed.

As of the writing of this guide, the latest version of MDT was The current version is the ADK for Windows 10, version Installation might require several minutes to acquire all components.

The first step in creating a deployment share is to mount this file on SRV1. To open the deployment workbench, click Start , type deployment , and then click Deployment Workbench. To enable quick access to the application, right-click Deployment Workbench on the taskbar and then click Pin this program to the taskbar. Right-click the Operating Systems node, and then click New Folder.

Name the new folder Windows Complete the wizard using default values and click Finish. Right-click the Windows 10 folder created in the previous step, and then click Import Operating System. For purposes of this test lab, we will only add the prerequisite. NET Framework feature. Commerical applications ex: Microsoft Office will not be added to the deployment share. For information about adding applications, see the Add applications section of the Create a Windows 10 reference image topic in the TechNet library.

The next step is to create a task sequence to reference the operating system that was imported. Use the following settings for the New Task Sequence Wizard:. To edit the task sequence, double-click Windows 10 Enterprise x64 Default Image that was created in the previous step.

Click the Task Sequence tab. Click another location in the window to see the name change. Under Select the roles and features that should be installed , select. NET Framework 3. NET 2. Enable Windows Update in the task sequence by clicking the Windows Update Post-Application Installation step, clicking the Options tab, and clearing the Disable this step checkbox.

Note: Since we are not installing applications in this test lab, there is no need to enable the Windows Update Pre-Application Installation step. However, you should enable this step if you are also installing applications. The next step is to configure the MDT deployment share rules. Click Apply and then click Edit Bootstrap. Replace the contents of the Bootstrap. The update process will take 5 to 10 minutes.

When it has completed, click Finish. Accept the default values on the Capture Image page, and click Next. Operating system installation will complete after 5 to 10 minutes, and then the VM will reboot automatically. Allow the system to boot normally do not press a key. The process is fully automated. Additional system restarts will occur to complete updating and preparing the operating system.

Setup will complete the following procedures:. This step requires from 30 minutes to 2 hours, depending on the speed of the Hyper-V host. After some time, you will have a Windows 10 Enterprise x64 image that is fully patched and has run through Sysprep. Use the following values in the New Deployment Share Wizard:. Click Next , verify the new deployment share was added successfully, then click Finish.

Name the new folder Windows 10 and complete the wizard using default values. On the Destination page, accept the default Destination directory name of REFW10X , click Next twice, wait for the import process to complete, and then click Finish. See the following example:. Right-click the Windows 10 folder created in the previous step, and then click New Task Sequence.

Click the Rules tab and replace the rules with the following text don’t click OK yet :. In this example a MachineObjectOU entry is not provided. Normally this entry describes the specific OU where new client computer objects are created in Active Directory. However, for the purposes of this test lab clients are added to the default computers OU, which requires that this parameter be unspecified.

If desired, edit the follow line to include or exclude other users when migrating settings. For example, to migrate all users on the computer, replace this line with the following:. For more information, see ScanState Syntax.

Use the default options for the Update Deployment Share Wizard. The update process requires 5 to 10 minutes to complete. On the Monitoring tab, select the Enable monitoring for this deployment share checkbox, and then click OK. Click Finish to complete adding a boot image. This is just an artifact of the lab environment. Back Next. Microsoft recommends you install a download manager.

Microsoft Download Manager. Manage all your internet downloads with this easy-to-use manager. It features a simple interface with many customizable options:. Download multiple files at one time Download large files quickly and reliably Suspend active downloads and resume downloads that have failed. Yes, install Microsoft Download Manager recommended No, thanks. What happens if I don’t install a download manager?

Why should I install the Microsoft Download Manager? In this case, you will have to download the files individually.

You would have the opportunity to download individual files on the “Thank you for downloading” page after completing your download. Files larger than 1 GB may take much longer to download and might not download correctly. You might not be able to pause the active downloads or resume downloads that have failed. Details Note: There are multiple files available for this download. Once you click on the “Download” button, you will be prompted to select the files you need.

File Name:. Date Published:. File Size:. System Requirements Supported Operating System. Install Instructions From the link above, download the installer for the proper system architecture.